As an Amazon Associate I earn from qualifying purchases.
EWK #ad - The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. Contact us if you need further assistance. Suction speed: 1. 8l/min. Wide application perfectly extracts most fluid types: engine oil, gear oil, jet ski and etc.
Applicable for car, coolant, transmission fluid, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor. Humanized design with ewk oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
Excellent working experiencedurable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil. No oil left the vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Note: gasoline and fluids with high volatility, boat, lawn mower, motorcycle, and power steering fluid.
Mityvac #ad - Pinpoints external leaks caused by loose clamps or leaky hoses, connectors, water pumps or radiators. Diagnoses internal leaks caused by a blown head gasket or damaged block or head. Contains adapters to test the cooling system and caps of most U.
FOUR UNCLES #ad - Perfect for working on a car in the garage, change oil anytime, truck, or lawn mowers. Work freelynot limited to places, also suitable for using outdoors on boats, anywhere. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
2 way usagepneumatic and manual mode to fit any condition. No oil left vacuum fluid extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan.
The fluid extractor can be used to remove fluids from engine oil to brake fluids. Speedy extractionfast extraction speed of 1. 8l /min. It has a 6. 5l reservoir, 3. 28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil. Just simply open the hook and insert tube to change engine oil.
OEMTOOLS #ad - Under pressure: change transmission fluid anytime with the pneumatic and manual pumping options; This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI. Carefree car and boat care: easily remove engine oil, coolant, gear oil, power steering fluid, transmission fluid, and more with this versatile fluid evacuator pump.
Time flies: draining oil from beneath a vehicle takes eons; The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
SWANLAKE GARDEN TOOLS #ad - Also 3. 2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid. The manual mode could be used by itself without any other equipments. The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor.
Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation.
Its a perfect tool for working on vehicles anytime and anywhere. No need to lift up or crawl under the car to drain out the oil. Note:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used. Fast suction speed of 1. 8l/min. 6. 5l vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan.
ARES #ad - Thanks to the included adapter, you can even use this fluid extractor as a brake bleeder. With your support, you realize they are more than a pet, we’re proud to help this great organization. If you have a pet, they are part of the family. Applications: this fluid extractor is ideal for removing used fluids from ATVs, Farm and Industrial Equipment, Vehicles, Watercrafts, Boats, Small Aircraft Engines, Motorcycles, transmission and lubricating oils or even water, Snowmobiles, and more.
Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. Item specifications: our manual and pneumatic fluid extractor features a 10L capacity and comes four suction tubes so you'll have everything you need to use it with your air system or by hand with the attached manual pump.
You are backed by our Performance Assurance. Thanks to automatic overflow prevention and a quick-drain pouring spout, water, so you can safely use it to remove and change brake fluid, engine oil, gear oil, you can also be sure that you won't be left with another mess to clean up after use. Design: this two-way fluid extractor is made of durable oil and chemical-resistant polypropylene and features a non-sparking non-power design, transmission fluid, lubricants, and more from nearly any application. If you have any issues with your areS Manual/Pneumatic Fluid Extractor, replacement, parts, simply contact customer service for troubleshooting help, or refund.
kweiny #ad - One can do all the work for brake system bleeding effectively. Used for fluid extraction, gear oil, clutch oil, engine oil, such as brake oil, water, coolant, power steering oil, etc.
Working requirements: compressed air 20psi≤p≤120psi, the height of the pulling liquid increases with the increase of air pressure.
EONLION #ad - Advantage- fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Function-10l capacity pneumatic air suction pump will help you quickly change pump/distribute the vehicle's ATF oil.
Equipped with pressure gauge 0-80 psi/0-6 bar, which can accurately read data. Simple operation-load more fluid at once.
The consistent conversion of the 2-way control valves blue screw valve and air inlet ball valve on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Fitment- suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT.
FIRSTINFO TOOLS FIT YOUR NEEDS #ad - 100% genuine guarantee please identify firstinfo oil / fluid extractor that has the patent authentication. Us patent number: 8360741 we provide you quality assurance tools with 12+10 months after-sales warranty 10 months warranty by register support.
All the tubes can be purchased individually in FIRSTINFO store. Help you to achieve the satisfactory shopping experience. No oil left come with an extra Ø 3.
Dual-mode pneumatic mode for effortless and effective extraction way, and the Manual Mode allows you to do fluid changing without equipment restrictions. Replacing tubes available the sealing cap to avoid any dust or dirt and prevent the liquid from spillage during transport.
1. EWK
#adEWK Patented 15L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation
#adApplicable for car, coolant, transmission fluid, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor. Humanized design with ewk oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
More information #ad
Dual-purpose equipped with pneumatic and manual mode depend on the environment and your own equipment. Excellent working experiencedurable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil. No oil left the vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Note: gasoline and fluids with high volatility, boat, lawn mower, motorcycle, and power steering fluid.
| Brand | EWK #ad |
| Manufacturer | EWK #ad |
| Height | 10.24 Inches |
| Length | 23.62 Inches |
| Width | 10.24 Inches |
| Part Number | EB0244 |
| Model | 5841862604 |
More information #ad
2. Mityvac
#adMityvac MV7300 Pneumatic Air Operated Fluid Evacuator with Accessories for Draining Engine Oil or Transmission Fluid Directly Through The Dipstick Tubes
#adMore information #ad
Tests radiator and coolant bottle caps to ensure they are maintaining the correct pressure. And asian cars and light trucks, as well as many European vehicles. Economical, accurate and simple method to find common causes of overheating. S.| Brand | Mityvac #ad |
| Manufacturer | Lincoln #ad |
| Height | 25.8 Inches |
| Length | 12.9 Inches |
| Weight | 4.1 Pounds |
| Width | 9.5 Inches |
| Part Number | MV7300 |
| Model | 7300 |
| Warranty | 1 yr warranty on material and workmanship |
More information #ad
3. FOUR UNCLES
#adFOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills
#ad2 way usagepneumatic and manual mode to fit any condition. No oil left vacuum fluid extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan.
More information #ad
Easy to usewith four uncles oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode. The fluid extractor can be used to remove fluids from engine oil to brake fluids. Speedy extractionfast extraction speed of 1. 8l /min. It has a 6. 5l reservoir, 3. 28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil. Just simply open the hook and insert tube to change engine oil.
| Brand | FOUR UNCLES #ad |
| Manufacturer | FOUR UNCLES #ad |
| Part Number | JS--0011 |
More information #ad
4. OEMTOOLS
#adManual and Pneumatic Oil Extractor, OEMTOOLS 24937 6 Quarts 1.5 Gallon Pneumatic and Manual Fluid Extractor, Vacuum Evacuator, Fluid Vacuum Extractor
#adTime flies: draining oil from beneath a vehicle takes eons; The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
More information #ad
Double duty: for pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole; Manually suction fluid with the engine oil pump's oversized handle. Don’t cry over spilled oil: the 1. 5 gallon reservoir is a solid one-piece tank that can't leak out the bottom; The built-in shutoff prevents overfilling the reservoir.| Brand | OEMTOOLS #ad |
| Manufacturer | OEMTOOLS #ad |
| Height | 8.74 Inches |
| Length | 19.13 Inches |
| Weight | 6.94 Pounds |
| Width | 8.82 Inches |
| Part Number | 24937 |
| Model | 24937 |
| Warranty | OEMTOOLS Limited One Year |
More information #ad
5. SWANLAKE GARDEN TOOLS
#adSWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool
#adUse this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation.
More information #ad
The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode. Pneumatic mode and manual mode to fit all situation. Its a perfect tool for working on vehicles anytime and anywhere. No need to lift up or crawl under the car to drain out the oil. Note:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used. Fast suction speed of 1. 8l/min. 6. 5l vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan.
| Brand | SWANLAKE GARDEN TOOLS #ad |
| Manufacturer | SWANLAKE GARDEN TOOLS #ad |
| Part Number | SW-66056 |
| Model | SW-66056 |
More information #ad
6. ARES
#adDurable Polypropylene Construction, Powerful Suction with Included Hand Pump or Pneumatic System, Manual/Pneumatic Fluid Extractor with Brake Bleeder Adapter, ARES 15081, 10L Capacity
#adAspca business ambassador: we are proud to be part of the aspca business Ambassador Program. Item specifications: our manual and pneumatic fluid extractor features a 10L capacity and comes four suction tubes so you'll have everything you need to use it with your air system or by hand with the attached manual pump.
More information #ad
Need a manual? Download it for free on our website! Whether you need to remove engine, this fluid extractor has you covered. Reliable | effective | efficient: users trust ares to be quality tools. You are backed by our Performance Assurance. Thanks to automatic overflow prevention and a quick-drain pouring spout, water, so you can safely use it to remove and change brake fluid, engine oil, gear oil, you can also be sure that you won't be left with another mess to clean up after use. Design: this two-way fluid extractor is made of durable oil and chemical-resistant polypropylene and features a non-sparking non-power design, transmission fluid, lubricants, and more from nearly any application. If you have any issues with your areS Manual/Pneumatic Fluid Extractor, replacement, parts, simply contact customer service for troubleshooting help, or refund.
| Brand | ARES #ad |
| Manufacturer | ARES #ad |
| Height | 25.59 Inches |
| Length | 10.75 Inches |
| Width | 10.24 Inches |
| Part Number | 15032 15081 |
More information #ad
7. kweiny
#adKweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid
#adWorking requirements: compressed air 20psi≤p≤120psi, the height of the pulling liquid increases with the increase of air pressure.
More information #ad
Air inlet: 1/4" quick coupler male plug;. Suitable for car, motorcycle, truck, engineering vehicle and other machinery that need to be extracted liquid;. Make the work more clean, no dirty oil stained on floor;. The working principle and operation steps are detailed in the instructions on the package.| Brand | kweiny #ad |
| Manufacturer | Xingzhu #ad |
| Height | 2.5 Inches |
| Length | 8 Inches |
| Weight | 0.81 Pounds |
| Width | 5 Inches |
| Part Number | XZAMFE1 |
More information #ad
8. EONLION
#adEONLION 10L Pneumatic Fluid Extractor Dispenser and Oil Transfer System Refill Evacuator Gearbox Tool Kit with Metal ATF Adapters/Hose
#adEquipped with pressure gauge 0-80 psi/0-6 bar, which can accurately read data. Simple operation-load more fluid at once.
More information #ad
Why need it- pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Pneumatic operation, easy to suck or pump oil. The consistent conversion of the 2-way control valves blue screw valve and air inlet ball valve on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Fitment- suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT.
| Brand | EONLION #ad |
| Manufacturer | EONLION #ad |
| Part Number | 133 |
More information #ad
9. FIRSTINFO TOOLS FIT YOUR NEEDS
#adFIRSTINFO Patented 10.5L Manual/Pneumatic Oil Change Extractor Pump for Automobile Fluids Evacuation w/Extra Storage Tube & Dia. 3.5 x 4.5mm Tube A1107USY5
#adAll the tubes can be purchased individually in FIRSTINFO store. Help you to achieve the satisfactory shopping experience. No oil left come with an extra Ø 3.
More information #ad
5 x 4. 5mm thinnest tube to extract oil through the dipstick funnel and reach the bottom of the oil pan to suck up the last drop of fluid. Convenient tubes storage come with a no-assembly-required storage set to store oil tubes easily after operating, keeping the work area clean and tidy. Dual-mode pneumatic mode for effortless and effective extraction way, and the Manual Mode allows you to do fluid changing without equipment restrictions. Replacing tubes available the sealing cap to avoid any dust or dirt and prevent the liquid from spillage during transport.
| Brand | FIRSTINFO TOOLS FIT YOUR NEEDS #ad |
| Manufacturer | FIRSTINFO TOOLS #ad |
| Height | 16.93 inches |
| Length | 11.02 inches |
| Weight | 7.72 pounds |
| Width | 10.63 inches |
| Part Number | A1107USY5 |
| Model | A1107USY5 |
| Warranty | 12+10 months after-sales warranty (10 months warranty by register) |
More information #ad
