Top 9 MIFARE Card Writer – Computer Memory Card Readers

As an Amazon Associate I earn from qualifying purchases.

1. myownid


S50/S70 Writer for Winx +2 Mifare Cards, FissaiD RFID Reader Writer 13.56M Mifare 14443A USB Reader Reades Ntag S50 S70 Desfire EVx 4/7 Byte UID for Android Linux iOS Winx

myownid #ad - Mifare reader function configurable with config card: Format, buzzer, keyboard layout, set Reader/Writer mode. Mifare reader default setting: 8H_10D format10 digits Decimal number, send data to cursor location.

Usb reader for android/linux/windows/arduino/iOS/Raspberry, Output UID in one of 28 type formats, Plug to Play. Rfid writer 13. 56m writer mode reads/ writes mifare classic S50 S70 sector data, Windows PC software is downloaded on line, You may try Software before purchasing. Rfid reader usb reader 13. 56m reader, ev1, s70, ntag, reads mifare classic S50, Evx, DesFire, 4 BYTE and 7 BYTE UID.
Brandmyownid #ad
Manufacturermyownid #ad
Part NumberRFID Reader MF-2
ModelRFID Reader MF-2



YARONGTECH MIFARE Classic® 4K RFID Smart Card NFC Chip 13.56MHZ IC Hotel Key Card Pack of 10

YARONGTECH #ad - Blank white both sidesno printed numbers, no magnetic strips and no slots or holes. They are credit card size, each card individually OPP bag packed. But they can not work with hid, miwa and onITY LOCKS, Amiibo and TagMo etc.

Mifare classic 4k card operates at 13. 56mhz wireless frequency, but uid can’t change, according to the iso14443A standard, uid is not rewritable, and contains 1K bytes of read/write memory, MIFARE and MIFARE Classic are trademarks of NXP B. V. Printable on all iso standard desktop photo id card printersNOT Use for INKJET Printers: Evolis, Fargo, Zebra, Magicard, Badgy, DataCard etc. All cards are pre-programmed with a unique id4 byte uid. These rfid cards work with kaba, saflok, salto and assa abloy locks/systems, also compatible with RC522 and PN532 readers. The uid is not changeable, factory default key: FF FF FF FF FF FF.
ManufacturerYARONG #ad
Part NumberMIFARE Classic® 4K wristbands

3. myownid


RFID Card Reader 13.56MHz Mifare Reader/Writer: Can Works as a Mifare Card UID Reader OR a Mifare Card Programmer Windows Program Support +5 Mifare Cards

myownid #ad - 2 mifare card reader mode reads uid of 14443a mifare card, include Mifare Classic, UltraLight, mifare Desfire, Mifare Plus, Mifare N-TAG/card emulation. 1 mifare card writer/mifare card uid reader simulate keyboard input/mifare Card UID READER USB 2.

0 communication; The Reader intergated 3 working modes, switched with config card. 4 mifare card writer mode is usb 2. 0 interface, program mifare Classic 1K/4K card sector data. 3 mifare 13. 56mhz rfid reader interface is hid usb, configurable to simulate usb keyboard input or USB 2. 0, has 28 output formats, supports Android Linux Windows iOsOTG adapter is requested under Android. 5 mifare 13. 56m writer supports the 2nd development with your own program, I can provide debug demo programmer by email. Only windows software is provided & it supports 1K/4K memory card only.
Brandmyownid #ad
Manufacturermyownid #ad
Height1.38 Inches
Length4.92 Inches
Width3.35 Inches
Part NumberRFID Reader01
ModelRFID Reader01



SDK, ETEKJOY ACR122U NFC RFID 13.56MHz Contactless Smart Card Reader Writer w/USB Cable, 5X Writable IC Card No Software

ETEKJOY #ad - If you are not familiar with it, don't buy. 1. Usb interface. Support new mifare ultralight c via pseudo apdus and Mifare Plus SL1 4 Byte UID, via pseudo APDUS and SL3.

You have to get a third-party application/software to work with it by yourself. It is professional hardware. Support iso 14443 type a and b, mifare, feliCa, and all 4 types of NFC ISO/IEC 18092 tags. Frequency: 13. 56mhz. It doesn't work for other frequencies. 2. Ccid standard. Pcsc compliant. Card reading distance of up to 50 mm depending on tag type. It works for frequency 13. 56mhz only. No software provided. Read/write speed up to 424 kbps.
BrandETEKJOY #ad
ManufacturerETEKJOY #ad
Weight0.22 Pounds
Part NumberACR122U-A9

5. ACS


ACR122U NFC Reader Writer + 5 PCS Ntag213 NFC Tag + Free Software

ACS #ad - Acr122u nfc reader writer. Iec14443a and iso18092 protocol compliance. 5 pcs ntag213 nfc tag samples and 2 pcs UID MF1 card. 13. 56 mhh support mifare 1k, Mifare plus, ntag213, ultralight /ultralightc, Mifare desfire. Provide sdk and free nfc tool software.
BrandACS #ad
ManufacturerACS #ad
Height0.5 Inches
Length3.54 Inches
Width2.56 Inches
Part NumberACR122U

6. HiLetgo


HiLetgo 3pcs RFID Kit, Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

HiLetgo #ad - The module use a voltage of 3. 3v, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Part Number3-01-0490-3pcs

7. Fongwah


FONGWAH 13.56MHz RFID Reader/ Writer with Dual Interface, Support Mifare Contactless Cards and Contact Cards, ISO 14443 A / ISO 7816 Compliance

Fongwah #ad - Parameterfrequency: 13. 56mhz, reading distance: up to 5cm, linux, ce, unix, me, vista, 2K, Support System: Windows 98, 2003, 732 bits and 64 bits, XP, Android. Read/ write function the s9 reader supports read/ write cards command.

Don't support 125kHz ID or HID cards. To write cards or tags, users should do the secondary development for your software accordingly. Dual interfacethis device supports contactless cards and contact cards e. G mifare s50/s70, and also supports reading and writing iso7816 contact cards, MIFARE DESFire, sle4442/ 44428, mifare pro, mifaRE Ultralight, 5542 Cards.

Users will need to make their own software according to our provided SDK. Please refer to the link for it. Http://en1. Fongwah. Com/wp-content/uploads/2022/06/S9-SDK-V2. 0038. Zip. Noteour reader is better for users with software development background since the device is not compatible with other third party applications. Protocal complianceiso14443, gsm11.
BrandFongwah #ad
Manufacturershenzhen fongwah technology company #ad
Height2.13 Inches
Length3.39 Inches
Weight0.32 Pounds
Width0.03 Inches
Part NumberFW-S9-BU-13-00

8. HongTie


English 10 Frequency RFID NFC Card Copier Reader Writer for IC ID Cards and All 125kHz Cards +13.56mhz UID Key

HongTie #ad - Note: the applicability of our reader is limited, or if you don’t know the type of your card, it cannot match all types of FRID cards. It can crack 13. 56mhz encryption cards. This device only supports partial sector encryption ic card, the device will show ‘’Decoding fails, please try to decode an upgraded version!’’Come with decoding software working on Windows.

To crack a encryption card, does not support all sectors encryption IC card. If your card is all sectors encryption, you need to connect the reade to a PC. Id cards: 125 khz, 750 khz, 625 khz, 1000 khz. Working frequencies. Please read our product description carefully. If your card is not the type listed by us, please do not buy it!!! Support read:em4100/em4200, uid cards, 1386/1326/1346;support cards write: 1386/1326/1346, t5577, em4305, Mifare classic, ntag203, Ultralight, Mifare UID cards.

Not compatible for iClass, awid, Indala and Keri cards. The software of our machine is only compatible with Windows system, not working with MAC system or Linux system. Ic cards: 13. 56 mhz, 875 khz, 500 khz, 375 khz, 250 khz, 125 kHz prox card.
BrandHongTie #ad
ManufacturerH&T Technology #ad
Part NumberHT-08CD-001

9. Generic


Desfire, Sony Felica, Ultralight, NTag. Includes 1 Ultralight tag., 4 1/8 inch x2 3/8 inch x3/4 inch 105x60x19mm, Model 4210N USB Powered 13.56MHz NFC Reader Writer. Reads and Writes MIFARE 1k, 4k

Generic #ad - Can detect chip type and show memory content. Far easier to program than other NFC readers. For indoor use only. Operating system: Windows 10 Can be used with Windows and Linux. Open source royalty free java source code. Emulate as USB serial port. Includes the reader/writer and a 1 meter USB mini cable. Video https://youtu. Be/bwucqj6haM0 Recycled plastic: enclosure is 3D printed with environment friendly PLA. Uses usb 2. 0 or 3. 0 port of a PC. Reads mifare? 1k, Ultralight?, 4k, Felica? cards. Full sdk available. Memory content could be edited.
BrandGeneric #ad
ManufacturerJence #ad
Height1 Inches
Length4 Inches
Width3 Inches
Part Number4210LH00