Top 9 Eve Mount Antenna Mast – Satellite Television Products

As an Amazon Associate I earn from qualifying purchases.

1. Skywalker

#ad

45-60 Inch Adjustable Eave Mount for Antenna

#adSkywalker #ad - Easy, safe way to mount an antenna to the eaves of a house. Built to hold up to a 2. 5” o. D. Outer Diameter mast. Distance range: adjustable from 45” to 60”. Strong, metal construction for superior mounting security. Adjustable to work with a flat or sloped roof.

Brand	Skywalker #ad
Manufacturer	Skywalker #ad
Height	4 Inches
Length	36 Inches
Weight	1 Pounds
Width	4 Inches
Part Number	4330164090
Model	4330164090

2. Easy-Up

#ad

HAM CB TV FM Dish, EZ 31 Roof Eave Antenna Mount/Gable End Bracket

#adEasy-Up #ad - 12 gauge galvanized steel. Adjustable from 45" to 60". Mast will set on the shelf created by the lower bracket. Upper & lower brackets accept antenna masts up to 1-3/4" od mast not included. Will stand off eave approximately 2-1/4". High quality gable eave mount for mounting antenna & mast on the eave of a house.

Brand	Easy-Up #ad
Manufacturer	Easy Up #ad
Part Number	EZ 31, EZ31
Model	EZ 31

3. Easy-Up

#ad

Push Up Pole for TV WiFi HAM Antenna, Easy Up EZ TM-50 44' Telescoping Mast

#adEasy-Up #ad - All installations must be bracketed or guyed. The pictured guy layouts are for a typical installation. 2. Features a heavy duty thumbscrew/collar system for setting height. Be sure your contact number is current on your order for freight delivery*.

Individual installation requirements may vary. Masting is overlapped for added strength and stability. Bottom: 2-1/4" od x 18 gauge x 100" long * 2nd section: 2" od x 18 gauge x 106" long * 3rd section: 1-3/4" od x 18 gauge x 112" long * 4th section: 1-1/2" OD x 18 Gauge x 118" Long * Top: 1-1/4" OD x 16 Gauge x 120" Long. Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.

See below for important shipping details. Shipping length: 123". Mast hardware included. Use in guyed or bracketed installations. 1. Antenna load top load should not exceed an effective projected area EPA of 2 square feet see your antenna specifications. 528" 44' assembled height. This mast ships via freight only. Weighs 45 lbs.

Brand	Easy-Up #ad
Manufacturer	Easy Up #ad
Height	5 Inches
Length	123 Inches
Weight	46 Pounds
Width	5 Inches
Part Number	EZ TM-50

4. DRM

#ad

Satellite Under Eave Mount 1 5/8 Non Penetrating Roof Mount for Outdoor Antennas.

#adDRM #ad - Powder Coated Finish. Will not void roof warranty. Dish network approved 1-5/8 Mount. Also make sure you have exposed rafter tails like the pictures indicate. Heavy duty Steel construction. Please note: this mount will not work with Directv satellite dishes, they require a 2'' mast.

Brand	DRM #ad
Manufacturer	DRM Products #ad
Height	3 Inches
Length	24 Inches
Width	15 Inches
Part Number	emv-3
Model	EMV4

5. NAC Wire and Cables

#ad

Heavy Duty Adjustable Eave Gable Antenna Mast Mount 1 1/4" to 2" OD End GEM 40-60 Pipe Off-Air Support Winegard for HD Roof Satellite Dish Outdoor HDTV Aerial Bracket

#adNAC Wire and Cables #ad - Accepts 1 1/4" to 2" od mast pipe 2 brackets 2 adjustable angles 2 1/8" Inch Wall Clearance 1 hardware package 12 Gauge Steel lag screws 36 x 5 x 3. Does not include mast.

Brand	NAC Wire and Cables #ad
Manufacturer	Winegard #ad
Part Number	10012202F

6. Channel Master

#ad

Channel Master CM-3090 Telescoping Universal Antenna Mast Pole Adjustable Roof Mount to Wall, Chimney on Flat, Slanting or Vertical Surface,43.125" x 9" x 4.75" in,Black, Eave, Attic

#adChannel Master #ad - Supported installs: roof, pitched, wall, Eave or Attic for Slanted, Vertical or Horizontal Surfaces. Revolutionary mounting plate offers multiple Customizable Adjustments Allowing for Installation on Angled and/or Pitched Surfaces While Maintaining a Vertical Positioned Mast. Compatible with most Types, Styles and Brands of Outdoor Antennas. Pre-galvanized steel: uv stable, matt Black Powder Coat. Includes telescoping mast with Adjustable Length from 24" to 44" inches. Max load: 30 lbs Depending on Mounting Surface.

Brand	Channel Master #ad
Manufacturer	CHANNEL MASTER #ad
Height	5.7 Inches
Length	26.9 Inches
Weight	5 Pounds
Width	6 Inches
Part Number	CM-3090
Model	CM-3090

7. Proxicast

#ad

Universal Outdoor Adjustable Pivot/Lock Bracket & J-Pipe Mast 1.5" x 18" Pole for Wall, Chimney or Roof Mounting, Gable, Eave, Proxicast Pro-Grade J-Max 100% Solid Stainless Steel Antenna Mount

#adProxicast #ad - Heavy duty antenna mounting kit - 304 stainless steel bracket & arm - 304 stainless Mounting Hardware Included - Will Not Rust onto your House! Unique locking pin - increases strength and Stability for Heavy Antennas at 0, +45, -45 Degrees. Adjustable pivot / slide - position JPole for Best Signal Reception; Mount Base to Any Flat or Sloping Surface. Reversible j pipe - extend Wall Standoff Distance for Antenna Mounting Flexibility. Universal design - compatible with any type/brand of antenna - 4G, CB, Weather Station, Helium, Satellite, TV / HDTV, Ham, 5G. Wifi, etc.

Brand	Proxicast #ad
Manufacturer	Proxicast #ad
Height	4.5 Inches
Length	11 Inches
Width	7 Inches
Part Number	ANT-800-JP3
Model	ANT-800-JP3

8. Easy-Up

#ad

EZ NP-72-200 Non-Penetrating Roof Mount with 2" x 72" Mast w/Roof Mat

#adEasy-Up #ad - 35" x 28" base. Uses standard concrete blocks to anchor to roof. Used to protect roof from the frame rails. Made in the USA. Features 72" long mast which is 18 gauge clear coated zinc. Non-penetrating roof mount for satellite dishes, weather stations, wireless internet antennas, and more. Steel construction. Roof mat is 1/8" thick x 42" x 36". Professional installation is always recommended to determine ballast needs and roof integrity.

Brand	Easy-Up #ad
Manufacturer	Easy Up #ad
Height	50 Centimeters
Length	100 Centimeters
Weight	100 Kilograms
Width	100 Centimeters
Part Number	4330253206
Model	EZ NP-72-200

9. Channel Master

#ad

41 Foot Maximum Length CM-1850, Channel Master Telescoping Antenna Mast Galvanized Steel Pole with Guy Rings

#adChannel Master #ad - Trusted quality: channel master has been manufacturing Antennas and Installation Accessories for Over 70 Years Since 1949 Offering Best of Class Warranty and Support.

Inside diameter: top section = 1. 125 inches, bottom Section = 2. 125 inches. Includes: guy rings, mast clamps, platform Pins & Installation Guide - Material: 18 Gauge. 052 galvanized Steel. Diameter: top section = 1. 25 inches, fourth section = 2. 0 inches, third Section = 1. 75 inches, second Section = 1. 5 inches, bottom Section = 2. 25 inches. Size: maximum extended length: 406 feet, minimum Collapsable Length: 9. 0 feet.

Brand	Channel Master #ad
Manufacturer	Channel Master #ad
Height	600 Inches
Length	3.75 Inches
Weight	38 Pounds
Width	3.75 Inches
Part Number	CM-1850
Model	CM-1850