Top 7 Level Shifter Adafruit – Electronics Features

As an Amazon Associate I earn from qualifying purchases.

1. IS

#ad

Icstation Logic Level Converter 3.3V 5V Bi-Directional High Speed Shifter for Arduino Raspberry Pi IIC I2C SPI, 4 PCS TXS0108E 8 Channel Level Shifter

#adIS #ad - Widely used in the communication between 5v scm and 3. 3v device, 3. 3v scm and 5V device. Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect.

It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices. It can transmit bi-directionally between high logic voltage and low logic voltage through 8 channels. The oe enable IO is active at high level. Vcca side voltage range: 1. 2v-3. 6v; vccb side voltage range: 1. 65v-5. 5v. It is recommended to connect the IO port of the low voltage end. Output enable: the chip used by the module is txs0108e, which provides two-way communication capability. 8 digit bi-directional translator: logic level translator can safely step down 5V to 3. 3v and also step up 3. 3v to 5V.

Brand	IS #ad
Manufacturer	Icstation #ad
Weight	0.02 Pounds
Part Number	709804
Model	TXS0108E 8CH Voltage Level Converter

2. DEVMO

#ad

DEVMO 5PCS IIC I2C Logic Level Converter Bi-Directional Module 4 Channels 5V to 3.3V Shifter Compatible with Ar-duino

#adDEVMO #ad - The board needs to be powered from the two voltages sources high voltage and low voltage that your system is using. This level converter works with 2. 8v and 1. 8v devices. The level converter is very easy to use. Dimensions: 063 x 052" 16. 05 x 13. 33mm. Brand new and High Quality.

Brand	DEVMO #ad
Manufacturer	DEVMO #ad

3. KeeYees

#ad

KeeYees 10pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter for Arduino Pack of 10

#adKeeYees #ad - The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3. 3v and steps up 3. 3v to 5v at the same time. Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. This level converter works with 2. 8v and 1. 8v devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.

Brand	KeeYees #ad
Manufacturer	KeeYees #ad
Height	0.2 Inches
Length	3.94 Inches
Width	3.94 Inches
Part Number	KYES505-10
Model	8541715756

4. ANMBEST

#ad

Anmbest 5PCS 4 Chanels High Speed Bi-Directional 3.3V-5V Logic Level Converter for Arduino Raspberry Pi Electronic Development

#adANMBEST #ad - External pull-ups can be added to speed up the rise time further at the expense of higher current draw. Universal compatibility: Module compatible breadboard, can be directly inserted in the breadboard to use. Spi or asynchronous TTL serial.

Fast conversion: the logic high levels on each side of the shifter are achieved by 10 kΩ pull-up resistors to their respective supplies; these provide quick enough rise times to allow decent conversion of fast mode 400 kHz I²C signals or other similarly fast digital interfaces e. G. Converting between logic levels as low as 1. 5 v on the lower-voltage side and as high as 18 V on the higher-voltage side. Suitable for multiple interfaces: its four channels are enough to support most common bidirectional and unidirectional digital interfaces, SPI, including I²C, and asynchronous TTL serial.

Convert different logic levels:this logic level converter features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels. Attention:this module comes with male header pins that require soldering. B>.

Brand	ANMBEST #ad
Manufacturer	ANMBEST #ad
Part Number	Anmbest_MD33
Model	NA

5. GeeekPi

#ad

GeeekPi 6Pack TXS0108E 8 Channel Logic Level Converter Bi-Directional High Speed Full Duplex Shifter 3.3V 5V for Arduino Raspberry Pi

#adGeeekPi #ad - Widely used in the communication between 5v scm and 3. 3v device, 3. 3v scm and 5V device. Vcca side voltage range: 1. 2v-3. 6v; vccb side voltage range: 1. 65v-5. 5v. Serial communication interface is compatible with UART/IIC/SPI port, which is easy to connect. 8 digit bi-directional 3. 3v-5v/5v-3. 3v logic level converter board; It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage. It can also apply in the level conversion between MCU and SD card, MCU and iic/spi serial port devices.

Brand	GeeekPi #ad
Manufacturer	GeeekPi #ad
Part Number	D-0010
Model	D-0010

6. AITRIP

#ad

Aitrip 15pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter for Arduino

#adAITRIP #ad - Four mos tube achieve four-way 3V and 5V level bidirectional conversion. This level converter also works with 2. 8v and 1. 8v devices. Can realize signals bidirectional conversion such as UART, IIC, SPI. The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3. 3v and steps up 3. 3v to 5v at the same time.

Brand	AITRIP #ad
Manufacturer	AiTrip #ad
Part Number	16917

7. Satisfy Electronics

#ad

1pcs IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V For Arduino

#adSatisfy Electronics #ad - High voltage 5v for example to the hv' pin, low voltage 3. 3v for example to lv', and ground from the system to the GND' pin. The board needs to be powered from the two voltages sources high voltage and low voltage that your system is using. Dimensions:063 x 052" 16. 05 x 13. 33mm. The level converter is very easy to use.

Brand	Satisfy Electronics #ad
Manufacturer	satisfyelectronics #ad
Weight	0.04 Pounds
Part Number	4330118017
Model	4330118017