As an Amazon Associate I earn from qualifying purchases.
KICKER #ad - Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio. Using nothing more than your factory speaker wires, the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp, 12-volt remote wire using DC offset.
PAC #ad - Designed to optimize audio levels between radio and amplifier to achieve the best audio quality. Single stereo gain controls. Pro series 2-channel high power line output converter. Ultra-compact size for greater installation flexibility.
NuIth #ad - The high voltage signal output of the amplifier or speaker to convert low-voltage signal. Convert car stereo speaker wire output to rca cable outputs. Tap into a speaker wire and it senses the signal, and turns on a relay to send power to the amp.
Convenient to use. In order to improve the sound quality, the function of RCA output can be convert high to low. Provide clean and excellent sound.
There is the level gain adjustment to adjust the bass down without having to pull over and manually adjust the amplifier. Easy to install. Car audio speaker level converter wiring adapter allows to add 2 channel or mono amplifier or subwoofer to existing factory or aftermarket car stereo kit.
Scosche #ad - External controller - includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. No need to remove the car stereo. Delivering premium performance without noise, static, or buzzing. Each converter includes easy to follow instructions to simplify the installation process.
Subwoofer - this diy speaker kit is a convenient speaker wire to subwoofer adapter. Easy installation - add an amplifier to nearly any stock stereo with this line out converter.
Buy with confidence - backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty. This remote bass knob lets you control the level of sound with convenience. This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. No reason to pull over and manually adjust the amplifier. Rca converter - speaker level to line level converter allows the addition of 2-channel or mono amplifiers.
NuIth #ad - Easy to install. Provides 70-1729 stereo radio harness to connect car radio stereo. Nuith supplies rca 2-channel line output converter to add an audio signal to an external amplifier. Compatible with acura tl 2009-2014, honda fit 2009-2017, honda insight 2010-2015, honda cr-v 2010-2016, honda Pilot 2012-2016, honda hr-v 2016-2017, Acura TSX 2009-2014.
Not compatible with factory amplified stereo systems like JBL, Bose, etc.
Replacement for honda accord 2008-2017, honda crz 2011-2016, honda odyssey 2011-2017, honda civic 2012-2016, honda ridgeline 2009-2014. Rca output and a power wire for the remote amplifier turn on connection. This amplifier subwoofer adapter kit Only works with factory non-amplified systems. Without cutting any oem wire harness required. Fully adjustable gain control.
NuIth #ad - Add amp subwoofer interface to factory radio stereo replacement for toyota: toyota: 1987-2016 4 runner, 2000-2020 tundra, 2001-2020 sequoia, 1986-2006 celica, 2001-2020 prius, 1995-2018 tacoma, 1995-2016 avalon, 1987-2019 corolla, 1998-2020 sienna, 1987-2017 camry, 2007-2017 Yaris, 2005-2013 matrix, 1996-2018 RAV4, 1987-2002 Land Cruiser, 2001-2019 Highlander.
Only works with factory non-amplified systems no JBL/Synthesis, etc. Provides 70-1761 radio harness to connect stereo. Replacement for lexus: 1996-1997 lx 450, 2005-2016 tc, 2004-2006 xa, 2016-2018 wrx, 2015-2017 legacy, 1998-2006 lx 470.
Which help your an Amp or Sub system much faster and eliminate radio noise. Fully adjustable gain control. Our amplifier and subwoofer adapter cable is made of high grade copper core that keeps excellent conductivity and ensure lifespan. Fit scion 2013-2016 fr-s, 2016-2018 crosstrek, 2015-2017 outback, 2016-2018 forester, 2013-2016 Frs, 2012-2015 Iq, 2008-2014 Xd. This amp & sub wiring adapter interface is used to add amplifier or subwoofer for factory OEM radio system to upgrade the stock audio on your Toyota vehicle.
LEIGESAUDIO #ad - Add an amplifier to nearly any radio with the Line-Out Converter. Quality:high quality Miniature Surface Mount Line Output Converters. Use the adjustment rotate button, you can adjust the bass down without having to pull over and manually adjust the input level of the amplifier to the minimal one, very convenience.
High-quality sound: no need to worry about interrupted sound, static or loss of quality during an important event because this cable is made with highly durable construction and delivers premium performance without noise, static, or buzzing.
AUDIOTEK #ad - Rca function high to lowthe converter allows you to get RCA line level outputs from your high-level output device. It also can convert the high-voltage signal output of the amplifier or speaker to the low-voltage signal, improve sound quality.
Purpose high-frequency speaker output will be converted to low-frequency RCA output, connect the car amplifier subwoofer signal input. For car cd, vcd, dvd100% brand new high to low converter, used for car CD VCD DVD player without low frequency RCA output.
Kicker #ad - Two channel Speaker To Rca. World's first micro Surface Mount Line-Out Converter. K-series Interconnect Cable. K-grip dual-mold Connectors Offer Sure Grip.
1. KICKER
#adKICKER 46KISLOC2 2-Channel Line Output Converter with Remote Turn-On Wire
#adMore information #ad
Add an amplifier to nearly any radio with the kisLOC2 Stereo Line-Out Converter. Accepts up to 55 watts 16 volts of input signal.| Brand | KICKER #ad |
| Manufacturer | Kicker #ad |
| Height | 2 Inches |
| Length | 6 Inches |
| Weight | 0.19 Pounds |
| Width | 5 Inches |
| Part Number | 46KISLOC2 |
| Model | 46KISLOC2 |
More information #ad
2. PAC
#adPAC LP7-2R L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On
#adMore information #ad
Configurable for speaker level or RCA level input/output. High power—conservatively rated @ 55W per channel. Ideal use when replacing factory OEM radio or amplifier. Built-in remote turn-on circuit. Accepts both high-level & low-level input. Ultra-compact housings achieved by recessing transformers into circuit board.| Brand | PAC #ad |
| Manufacturer | PAC #ad |
| Height | 1.1 Inches |
| Length | 7.6 Inches |
| Weight | 0.45 Pounds |
| Width | 4 Inches |
| Part Number | LP7-2R |
| Model | LP7-2R |
| Warranty | Manufacturer |
More information #ad
3. PAC
#adPAC LP7-2 L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On 4in. x 8in. x 1in.
#adPAC #ad - Pro series 2-channel High Power Line Output Converter. Single dial, precision matched stereo, level gain adjustment. Configurable for speaker level or RCA level input/output.More information #ad
Designed to optimize audio levels between radio and amplifier to achieve the best audio quality. Ideal for use when adding an amplifier to an OEM system.| Brand | PAC #ad |
| Manufacturer | AAMP of America #ad |
| Height | 1.25 Inches |
| Length | 4 Inches |
| Weight | 0.25 Pounds |
| Width | 8 Inches |
| Part Number | LP7-2 |
| Model | LP7-2 |
More information #ad
4. NuIth
#adNuIth Car Radio Stereo High to Low Converter Wire Adapter 2-Channel Adjustable Amplifier Subwoofer Interface w/Remote Turn On RCA Car Line Output Wire Cable
#adConvenient to use. In order to improve the sound quality, the function of RCA output can be convert high to low. Provide clean and excellent sound.
More information #ad
Use this adapter when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input. Reasonable and neat power plug, it has the prefect bonding and contact stability. There is the level gain adjustment to adjust the bass down without having to pull over and manually adjust the amplifier. Easy to install. Car audio speaker level converter wiring adapter allows to add 2 channel or mono amplifier or subwoofer to existing factory or aftermarket car stereo kit.
| Brand | NuIth #ad |
| Manufacturer | NuIth #ad |
| Height | 0.7 Inches |
| Length | 3.9 Inches |
| Weight | 0.22 Pounds |
| Width | 2.3 Inches |
| Warranty | 1 |
More information #ad
5. Scosche
#adGrey, 2-Channel Signal Sensing Speaker Wire to RCA Adapter with Remote Control Knob, Scosche LOC90 Line Output Converter Adjustable Amplifier Add On Module for Car Stereo
#adSubwoofer - this diy speaker kit is a convenient speaker wire to subwoofer adapter. Easy installation - add an amplifier to nearly any stock stereo with this line out converter.
More information #ad
The rca line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car. Simply tap into the car audio speaker wire with snap adapters. Speaker to rca converter - converts car stereo output speaker wire to RCA connectors. Buy with confidence - backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty. This remote bass knob lets you control the level of sound with convenience. This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. No reason to pull over and manually adjust the amplifier. Rca converter - speaker level to line level converter allows the addition of 2-channel or mono amplifiers.
| Brand | Scosche #ad |
| Manufacturer | SCOSCHE #ad |
| Height | 5 Inches |
| Length | 2.25 Inches |
| Weight | 0.42 Pounds |
| Width | 5 Inches |
| Part Number | LOC90 |
| Model | LOC90 |
| Warranty | Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty. |
More information #ad
6. NuIth
#adNuIth Add an Amplifier Subwoofer Interface for Honda Civic Accord Acura 2008-2017 RCA 2-Channel Line Out Converter w/Remote Turn on Wiring to Factory Radio Stereo Update Sound System
#adNot compatible with factory amplified stereo systems like JBL, Bose, etc.
More information #ad
Honda add an amp sub interface wire adapter is used to add amplifier or subwoofer for factory OEM radio system to upgrade the stock audio on your Honda Acura vehicle, which help your an Amp or Sub system much faster and eliminate radio noise. Replacement for honda accord 2008-2017, honda crz 2011-2016, honda odyssey 2011-2017, honda civic 2012-2016, honda ridgeline 2009-2014. Rca output and a power wire for the remote amplifier turn on connection. This amplifier subwoofer adapter kit Only works with factory non-amplified systems. Without cutting any oem wire harness required. Fully adjustable gain control.
| Brand | NuIth #ad |
| Manufacturer | NuIth #ad |
| Height | 1 Inches |
| Length | 4 Inches |
| Width | 3 Inches |
| Warranty | 0.5years |
More information #ad
7. NuIth
#adSubaru 2012-2019 w/ Remote Turn on Wire 2 Channel RCA Line Out Converter Non JBL System, NuIth Add Amplifier Subwoofer Adapter Interface on Factory Car Radio System Compatible with Toyota 1988-2018
#adOnly works with factory non-amplified systems no JBL/Synthesis, etc. Provides 70-1761 radio harness to connect stereo. Replacement for lexus: 1996-1997 lx 450, 2005-2016 tc, 2004-2006 xa, 2016-2018 wrx, 2015-2017 legacy, 1998-2006 lx 470.
More information #ad
Professional material. No factory external amp systems. Add amp subwoofer interface to factory radio stereo compatible with subaru: 2013-2016 brz, 2015-2018 impreza, 1986-1990 dl, 2004-2015 xb, 2016 xv crosstrek. Which help your an Amp or Sub system much faster and eliminate radio noise. Fully adjustable gain control. Our amplifier and subwoofer adapter cable is made of high grade copper core that keeps excellent conductivity and ensure lifespan. Fit scion 2013-2016 fr-s, 2016-2018 crosstrek, 2015-2017 outback, 2016-2018 forester, 2013-2016 Frs, 2012-2015 Iq, 2008-2014 Xd. This amp & sub wiring adapter interface is used to add amplifier or subwoofer for factory OEM radio system to upgrade the stock audio on your Toyota vehicle.
| Brand | NuIth #ad |
| Manufacturer | NuIth #ad |
| Height | 1 Inches |
| Length | 2 Inches |
| Weight | 0.6 Pounds |
| Width | 2 Inches |
| Warranty | NuIth |
More information #ad
8. LEIGESAUDIO
#adLEIGESAUDIO Car Stereo Hight to Low Converter,2 Channel Line Output Convertor with Remote Turn On RCA Car Line Converter Output Adapter, Black
#adHigh-quality sound: no need to worry about interrupted sound, static or loss of quality during an important event because this cable is made with highly durable construction and delivers premium performance without noise, static, or buzzing.
More information #ad
Output conversion: Converts car stereo speaker wires output to RCA Cable outputs. Experience true sonic accuracy at any volume level, with all the sparkling highs and thunderous lows of your original audio. Adjustable attenuation: provide the level gain adjustment.| Brand | LEIGESAUDIO #ad |
| Manufacturer | LEIGESAUDIO #ad |
| Part Number | LG-77 |
More information #ad
9. AUDIOTEK
#adGround Loop Isolator, at-HL2, Audiotek 2 Channels Car Audio Hi Low High to Low Impedance RCA Line Converter for Car Receiver and Amplifier + Built-in Remote Turn-On
#adPurpose high-frequency speaker output will be converted to low-frequency RCA output, connect the car amplifier subwoofer signal input. For car cd, vcd, dvd100% brand new high to low converter, used for car CD VCD DVD player without low frequency RCA output.
More information #ad
Use the adjustment rotate button, you can adjust the bass down without having to pull over and manually adjust the input level of the amplifier to the minimal one, very convenience. Simple to installwiring diagram is attached on the back of the package, our line converter car audio is convenient to install. Adjustable attenuationprovide the level gain adjustment.| Brand | AUDIOTEK #ad |
| Manufacturer | AUDIOTEK #ad |
More information #ad
10. Kicker
#adKicker KISLOC 2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter
#adMore information #ad
| Brand | Kicker #ad |
| Manufacturer | Kicker #ad |
| Height | 0.5 Inches |
| Length | 4.5 Inches |
| Weight | 0.1 Pounds |
| Width | 2 Inches |
| Part Number | KISLOC |
| Model | KISLOC |
More information #ad
