Top 10 Canon M6 Mark II SmallRig – Professional Video Stabilizers

As an Amazon Associate I earn from qualifying purchases.



SmallRig M6 Mark II Cage for Canon M6 Mark II CCC2515

SMALLRIG #ad - Anti-twistthe camera cage mounts to the camera's tripod socket by a 1/4’’-20 screw, with anti-twist flanges on the base plate preventing wiggles. Locating holes for arri standard on the top and left are designed to work with accessories as SmallRig Handle 2165 or Magic Arm 2115.

The cage also has a built-in quick release plate for Arca-Swiss on the bottom for tripod mounting. Shoe mount & plate for arca-swiss on the top and left side features cold mounts for microphones or LED lights. Built-in screwdriverAn included flat screwdriver at the bottom is designed to tighten or detach the camera. The cage also has a built-in quick release plate for Arca-Swiss o the bottom for tripod mounting.

Built-in cold shoe mounts on the top and side are provided to attach microphones or LED lights. Ergonomic gripa contoured handgrip is built into one side of the upgraded cage allowing for more comfort and grip when using a handheld. Multiple mounting pointsfeatures multiple 1/4’’-20 and 3/8’’-16 threaded holes allowing mount of accessories such as side Handle 2093 or Cable Clamp 1822.
ManufacturerSmallRig #ad
Height3.21 Inches
Length5.33 Inches
Weight0.49 Pounds
Width2.27 Inches
Part NumberCCC2515B-CF-FBA-US



2916, SMALLRIG Mini Side Handle Handgrip with Dual 1/4"-20 Screw Mount for Mirrorless Digital Camera DSLR Camera Small Camera Cage Built-in Wrench, Up and Down Adjustable

SMALLRIG #ad - For right-hand/left-hand usehighly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. Besides, you could slide up and down for your optional positioning. Ergonomic designmade of aluminum alloy and plastic(PC+ABS) with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.

Smallrig 2916 any cage featuring two 1/4"-20 threaded holes with 18mm distance on the side, 2493, digital camera, such as SmallRig Cage 2999, 2087 etc. Lightweight & portableit weighs only 139g. Side handle for camera cagesmallrig mini side handle 2916 is designed for the cages of mirrorless, and other small cameras. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones.

Note: the maximum bearing capacity of the handle is 3. 5kg. Mounting optionssmallrig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off. Please do not overload. Two 1/4"-20 screws are fixed to the side of your camera cage.
ManufacturerSMALLRIG #ad
Height3.94 Inches
Length2.99 Inches
Weight0.31 Pounds
Width1.65 Inches
Part Number2916-CF



SmallRig M50 /M50 II /M5 Cage Upgraded , Aluminum Alloy Video Film Movie Making Rig with Integrated Grip and NATO Rail for Canon M50 /M50 II /M5 2168C

SMALLRIG #ad - Versatile mounting points: designed with cold shoe, led lights, 1/4" and 3/8" threaded holes to attach more accessories. The nato rails and locating holes for ARRI on side for handle mounting or other accessory. The 1/4" and 3/8" threaded holes on the bottom for different tripods or monopods.

You can achieve quick attach and release, lets you go from tripod to handheld shooting in seconds. Such as, microphone and monitor etc. The recessed arc-shaped design of the index finger grip makes the grip more comfortable. Customization & anti-scratch: it provides formfitting protection for Canon M50/M50 II/M5 camera and mounts to the camera using a 1/4"-20 screw with rubber cushion on the base plate preventing wiggles or scratches. All buttons unobstructed: form-fitting design with super CNC cutting technology will not block wifi transfer button, camera control buttons, camera hot shoe, hdmi/sdi slot and battery compartment.

It is made of ultra-tough and lightweight aluminum alloy, which is resistant to oxidation and scratches. Quick attach and release: built-in plate for arca on the bottom which makes it convenient to directly mount on clamps for Arca. Ergonomic & durable: the cage is equipped with ergonomically designed grip, compact and practical.
ManufacturerSmallRig #ad
Height3.86 Inches
Length5.24 Inches
Weight0.35 Pounds
Width2.24 Inches
Part Number2168B-CF-FBA-US



SmallRig Camera Top Handle Cheese Handle Grip with Built-in Shoe Mount for Camera Rig, Camera Cage 1638B

SMALLRIG #ad - Exquisite designthe smallrig versatile handle is made by aluminium alloy, this material is light, is very sturdy and solid, durable, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig.

Package includes: 1 x top handle; 1 x Hex Spanner ; 2 x 1/4" Screws. Camera cage handlethis smallrig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease. Mounting pointsthe smallrig 1638 camera handle with abundance of 1/4'' and 3/8'' mounting points, can attach different SMALLRIG rigs on it for additional attachment options and DIY operations.

Compatiblitysmallrig top handle 1638 can be attached to a camera cage directly with 2pcs 1/4 inch screws the adjustable space between two 1/4 inch screws is 30mm-40mm, Fits any cage with the standard 1/4 20 thread on top, such as SMALLRIG cage 2087, cage 2049, cage 1982, cage 1889 and any other cages of SMALLRIG.
ManufacturerSmallRig #ad
Height2.76 Inches
Length4.45 Inches
Weight0.22 Pounds
Width1.57 Inches
Part Number1638B



Friction Up to 180°, 1842, SMALLRIG Monitor Holder Mount for Camera Field Monitors

SMALLRIG #ad - Easy adjustmenthold fast and adjustable to position it up to 180° as per your need, and two inner M4 screws are applied for damping based on the weight of monitors, which enables you to have a better monitoring in shooting scenarios.

Smallrig provides friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty. High qualitymade of aluminum alloy, is very sturdy and solid. Please notethe max load of this monitor mount is 1. 5kg. For field monitorthe monitor holder is designed to support 5” or 7” monitor up to 1. 5kg onto a camera cage, handle, or other mounting systems via two 1/4”-20 screws, and can be tightened more with a hex spanner.

Rubber cushion on the top is utilized to prevent the monitor from scratching. Lock via 1/4" screwsthe monitor stand 1842 could be used on any accessories with two 1/4” threaded holes via two 1/4’’ counterbore screws, such as camera cage gh5 cage 2049/ a6500 cage 1889/ BMPCC 4K Cage 2203, handle wooden handle 2093, top plate fs7 top plate 1975, etc.
ManufacturerSMALLRIG #ad
Height1.42 Inches
Length1.89 Inches
Weight0.13 Pounds
Width1.14 Inches
Part Number1842-SR



2879, Outrigger Shoe Mount Adapter for Microphone, SmallRig Cold Shoe Extension, EVF and Camera Accessories

SMALLRIG #ad - Compact designthe mount weighs only 16g/06oz, the pocket-size cold shoe mount is exceptionally lightweight and durable to use. Anti-off designthe cold shoe extension features a stopper edge in one end to prevent your devices from suddenly sliding out.

Wide compatibilitythe cold shoe mount secures to rigs, brackets, and cages via two 1/4"-20 screws, easy to install and remove via a hex spanner includes. Supports shoe mount accessoriessmallrig Cold Shoe Mount 2879 is designed for mounting shoe mount devices such as flashes, lights, microphones, etc. Extends beyond the cagethe cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage.
ManufacturerSMALLRIG #ad
Height0.41 Inches
Length2.73 Inches
Width0.79 Inches
Part Number2044-SR



3021, Female HDMI Type A to Male Micro-HDMI Type D, 4K@60HZ, SMALLRIG Ultra-Slim 4K HDMI Adapter Cable, for Sony A7R IV A7RIII A7III A7II A7RII / for Fujifilm X-T2 X-T3

SMALLRIG #ad - Hdmi adapter cable d to asmallrig ultra slim 4k hdmi adapter cable d to a 3021 is a high-quality hdmi adapter cable Micro HDMI Male to Full HDMI Female for your camera setup. Ultra-slim cable for up to 4k@60hz videoit's hdmi 2. 0 version and supports resolution up to 4k@60hz and will be backward compatible.

Flexible pvc cableflexible pvc cablethis flexible, ultra-slim pvc cable measures 141. 1mm/5. 6" in length. Wide compatibilitysmallrig 3021 is compatible with cameras with micro hdmi ports, a7rii, a7riii, 2238, like for sony a7r iv, like ccs2416, 2228, etc. 2 x 1/4"-20 threads on female endthe female end of the adapter cable features two 1/4"-20 threads to attach to a cage, bracket, or rig, and the threads measure 0.35" apart from center-to-center. You can use an hdmi type A cable with your camera cage or rig with this adapter cable.

Besides, it can be used for camera cages or l brackets with no less than two 1/4"-20 thread holes 9mm distance from center to center on the left side, A7III, or for Fujifilm X-T2, 2229, X-T3, A7II, etc. The adapter cable features a female hdmi type A connector on one end and a male Micro-HDMI Type D connector on the other end to fit a variety of cameras. Two screws are included to mount the adapter onto your rig. Note: please make sure the HDMI port on your camera is a Full HDMI type.
ManufacturerSMALLRIG #ad
Height0.46 Inches
Length5.56 Inches
Weight0.07 Pounds
Width1.31 Inches
Part NumberSRUS-VA-20210128



HSS2425, SMALLRIG Universal Aluminum Side Handle Grip for DSLR Camera Cage with Cold Shoe Mount Built-in Wrench, 1/4 Threaded Holes

SMALLRIG #ad - Comfortable & lightweightit weighs 220g only and features an aluminum body with anti-slip silicone gel coverings to provide a comfortable and lightweight handheld shooting. The aluminum side handle is locked via two 1/4”-20 screws with 18mm distance and fits any cages or camera featuring two 1/4”-20 threaded holes with 18mm distance on the side.

Besides, you could slide up and down for your optional positioning. Aluminum nato side handlesmallrig aluminum side handle hss2425 is designed to provide a comfortable handheld shooting for videoshooter. Universality for both sidesthe smallrig hss2425 allows you to switch from the left to right quickly. If you want to use the handle on the other side of the accessory, use the hex to take off the connection metal part of handle and change the direction.

Built-in wrencha built-in wrench on the bottom can be used to adjust the handle up and down based on your needs. Mounting pointsit comes with one cold shoe mount and three 1/4”-20 thread holes on the top of the handle allow for mounting a light, microphone, mounting arm, monitor, or other accessories. Also this handle can be used with a hand strap for more security. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction.
ManufacturerSMALLRIG #ad
Height4.33 Inches
Length2.8 Inches
Weight0.44 Pounds
Width2.2 Inches
Part NumberHSS2425-SR



SmallRig Cage for Canon 5D Mark III IV CCC2271

SMALLRIG #ad - Built-in nato rail: it features a nato rail on the left side which allows you to assemble and disassemble your setup quickly by using accessories with nato clamp. The cage maintains the battery door, ports and buttons of camera access.

And it protects camera from twisting and scratching. Built-in compatible dovetail for arca style : with built-in compatible dovetail for arca style at the bottom of the cage, your setup could be switched fast between tripod and handle. Anti -twist and anti-scratch:it locks camera firmly via 1/4’’ screws at the bottom. Multiple threaded holes:the cage provides multiple 1/4’’-20, 3/8’’-16, locating threaded holes for ARRI and cold shoes for accessory attachment. Attached slotted screwdriver on the bottom of the cage provides convenience for you to lock and unlock camera. Compatibility: custom and form-fitted cage for Canon 5D III/ 5D IV.
ManufacturerSmallRig #ad
Height2.82 Inches
Length6.63 Inches
Weight0.75 Pounds
Width5.11 Inches
Part NumberCCC2271



SmallRig Camera Cage Kit for Canon R5 and R6 3185

SMALLRIG #ad - Compatibility: smallrig 3185b was developed for canon eos r5 and R6. It provides protection for canon R5 R6 camera with a wide range of accessories mounting points to make a convenient work of videography. The right-hand side is designed to fit camera handle for the original and comfortable grip feeling.

It is secured to a camera via one 1/4"-20 screw and two locating pins with silicone cushions on the top and bottom to prevent scratches. Multiple mounting options: built-in nato rail on top, a cold shoe holder and several 1/4"-20 and 3/8" -16 threaded holes. Comfortable and convenience: built-in spanner removes bottom screws and can be slid out from the side without interfering with the attachment of quick release plate. Built-in quick release plate: the cage's bottom quick release plate for Arca and 1/4"-20 threaded holes allow connecting the original RS2/RSC2 plate for Arca, which can be mounted onto RS2/RSC2 quick release plate for Manfrotto and then onto stabilizer.

Built-in quick release plate: the cage's bottom quick release plate for Arca and 1/4"-20 threaded holes allow connecting the original RS2/RSC2 plate for Arca, which can be mounted onto RS2/RSC2 quick release plate for Manfrotto and then onto stabilizer.
ManufacturerSmallRig #ad
Height6.69 Inches
Length5.91 Inches
Weight0.95 Pounds
Width4.33 Inches
Part Number3185-CF-FBA-US