As an Amazon Associate I earn from qualifying purchases.
B. C. Have various protection function to protect battery pack from protection function for charging, short circuit to avoid battery pack from explosion, fire and damage. 4. Hardware bms accessaries: a. The protection board has strong loading capacity and the maximum continuous discharge current can reach 80A.
Common port with balance function b. 1. Suitable for: support 3s 3. 7v lithium li-ion cells, charge& discharge current in 80A, Size in 150*102*15mm. Tip:don’t Support Series Connection. With new mos tube, low internal resistance, have high power, built in temperature control, high stability.

Discharge and charge current: bms supports up to 80 amp continuous discharge or 40A charge current. Programmable temperature protection: Li-ion battery pack will stop all current when its temperature reaches limit.

Wide application:the 18650 li-ion battery protection board is for 3 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.

Do not mix the good battery and the battery. Attention: do not mix the good battery and poor battery to use. Wiring:please check the picutre 3 wiring diagramstrictly according to the diagram wiring: 0VB 3.

With built-in intelligent chip, the battery pack charger can protect your devices against overcharge, over discharge, excessive currents, short circuits or overheating.
Package content: rgvota lcd display portable charger power bank, welcome guide, and Lifetime technical support. Usb c cable not be includedif you have any question, Micro cable, 3 Years warranty, pls feel free to contact us via message.

The power range described is applicable to the following products: vacuum cleaner, massager battery pack, solar street light battery pack, monitoring standby power supply, 12V electronic products, LED light backup power supply, etc. High quality mosfets such as vishay, aos, ir, etc. Fr-4 low temperature coefficient sheet, well designed and tested.


75*2. 02*039", great for DIY work. Multifunctional: this battery protection board will protect battery pack from overcharging, over-discharging over-current and short circuit, very useful.

Essential part for circuit board: Protection circuit board is the heart of battery pack, must to have to avoid battery pack from explosion, fire and damage.

Note: before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Balance current 0-5.
1ma, and the balance voltage accuracy is within 5mv! If it is used for 3S, the last line B4+ is empty. Otherwise, it will short-circuit and burn the board. Working principle: flying capacitor transfer charge transporter, 2oz copper thickness pcb. With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2. 7v, and the standby power consumption is less than 01mA.
1. JBDBMS
#ad
JBD BMS 3S 80A Li-ion PCB Protection Board with Passive Balance Wires 3.7V Battery Protection Board Hardware BMS for 18650 Battery Pack 12V with Balance Function
#adJBDBMS #ad - 2. Functions: a. Support 3s cells series protection, discharge overcurrent, discharging, such as lithium ion, it can be applied to lithium batteries with different chemical properties, Li-polymer.3. Package include: BMS& Balance Wires.B. C. Have various protection function to protect battery pack from protection function for charging, short circuit to avoid battery pack from explosion, fire and damage. 4. Hardware bms accessaries: a. The protection board has strong loading capacity and the maximum continuous discharge current can reach 80A.
More information #ad
Very low static current consumption C. Delivery time: delivery directly from jbd chinese factoryreal JBD BMS with high quality and high stability, it takes about 1-5days to send outmostly can send out within 3 days and delivery time in around 5-9 working days by express. Common port with balance function b. 1. Suitable for: support 3s 3. 7v lithium li-ion cells, charge& discharge current in 80A, Size in 150*102*15mm. Tip:don’t Support Series Connection. With new mos tube, low internal resistance, have high power, built in temperature control, high stability.
Brand | JBDBMS #ad |
Manufacturer | JIABAIDA #ad |
Height | 0.59 Inches |
Length | 5.91 Inches |
Width | 4.02 Inches |
Part Number | HP28SA-P3S-80A-80A-B |
Model | HP28SA-P3S-80A-80A-B |
More information #ad
2. DALY
#ad
DALY Smart BMS Li-ion 3S 12V 80A with Programmable Bluetooth Module and Common Port
#adDALY #ad - Programmable over current protection:Li-ion battery pack will stop charging when current is over limit and will stop discharging when current over limit.Discharge and charge current: bms supports up to 80 amp continuous discharge or 40A charge current. Programmable temperature protection: Li-ion battery pack will stop all current when its temperature reaches limit.
More information #ad
Shipment package: smart bms*1, uart cablepc screen *1, bluetooth module mobile app ios & Android*1pcs, balance wires*1, English version wiring manual*1. Perfect for your high current applications. Programmable over-charge over-discharge protection:Li-ion battery pack will stop charge when its voltage reaches limit and stop discharge when its voltage reaches limit.Brand | DALY #ad |
Manufacturer | Daly #ad |
Height | 0.75 Inches |
Length | 5.91 Inches |
Width | 2.6 Inches |
More information #ad
3. Hilitand
#ad
3S 11.1V/12V/12.6V 50A Balance 18650 Battery BMS PCB Protection Board with Balance
#adHilitand #ad - Unique designchoosing the correct protection board and applying it appropriately is vital to the longevity your batteries. Stablestable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection.Wide application:the 18650 li-ion battery protection board is for 3 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
More information #ad
Materiacharging connector and discharging connector are same, continuous discharging current is 50A. Use safety: 3s 12v bms protection board has balance function which would ensure each battery cell being fully charged at same time.Brand | Hilitand #ad |
Manufacturer | Hilitand #ad |
Height | 0 Inches |
Length | 0 Inches |
Width | 0 Inches |
Part Number | Hilitandrqa1hfe983 |
More information #ad
4. daier
#ad
2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board
#addaier #ad - Over voltage range: 4. 25-4. 35v ± 005v; over discharge voltage range: 2. 3-3. 0v ± 005v. When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same.Do not mix the good battery and the battery. Attention: do not mix the good battery and poor battery to use. Wiring:please check the picutre 3 wiring diagramstrictly according to the diagram wiring: 0VB 3.
More information #ad
7vb17. 4vb211. 1vb+, do not deliberately short circuit. Maximum operating current: 0-25A ;Maximum transient current: 34-40A. The internal resistance of 3 battery capacity are closer will be better. After the line is connected, Need to charge first, then have output. If not same, please fill in each set of batteries and then use.Brand | daier #ad |
Manufacturer | daier #ad |
Part Number | Z370*2 |
Model | Z370*2 |
More information #ad
5. RGVOTA
#ad
Dual Input USB-C Phone Charging Compatible with iPhone 13 Pro Max/13 Mini/12,Android Samsung Galaxy/Pixel/Nexus/iPad, Portable Charger 38800mAh,LCD Display Power Bank,4 USB Outputs Battery Pack Backup
#adRGVOTA #ad - Note: usb-c Input Only. Easily track the status of your charge on led digital Display. With 4 usb output ports and dual input5v/2. 1a, you have more options over how you recharge and for how many smart devices you want to fast active simultaneously.With built-in intelligent chip, the battery pack charger can protect your devices against overcharge, over discharge, excessive currents, short circuits or overheating.
More information #ad
Rgvota guarantee: three years warranty + lifetime technical support for our 2022 newest updated Version 38800mAh Portable Charger! Portable charger: 38800mah ultra-large cell capacity power bank will keep your phone running all day, It widely compatible with iPhone, Pixel, Nexus, Samsung Galaxy, LG smartphone and more USB devices. Package content: rgvota lcd display portable charger power bank, welcome guide, and Lifetime technical support. Usb c cable not be includedif you have any question, Micro cable, 3 Years warranty, pls feel free to contact us via message.
Brand | RGVOTA #ad |
Manufacturer | Dongguan Yuanhaoxun Technology Co., Ltd #ad |
Height | 0.9 Inches |
Length | 6.2 Inches |
Width | 3.1 Inches |
Model | HX200K1 |
Warranty | 24 Months Warranty |
More information #ad
6. Comidox
#ad
Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit 3Pcs
#adComidox #ad - With overcharge, over discharge, short circuit and other protection functions, over current, for a variety of shapes of various shapes 3.7v lithium battery. This protection board can not be used for iron ion polymer battery, 2 pieces and 24V series, electric fish battery pack, 775 4A or above motor, electric bicycle battery pack, hand drill battery pack, 1W fisheye LED lamp.More information #ad
It can meet various performance requirements and ensure the absolute safety and reliability of the battery pack. It is small in size and suitable for many applications requiring high integration and low cost. The power range described is applicable to the following products: vacuum cleaner, massager battery pack, solar street light battery pack, monitoring standby power supply, 12V electronic products, LED light backup power supply, etc. High quality mosfets such as vishay, aos, ir, etc. Fr-4 low temperature coefficient sheet, well designed and tested.
Brand | Comidox #ad |
Manufacturer | Comidox #ad |
Part Number | CP219 |
More information #ad
7. Songhe
#ad
Songhe 3S 11.1V 12V 25A 18650 Li-ion Lithium Battery PCB Protection Board Module with Balanced Protection 3pcs
#adSonghe #ad - 1. First detect cell voltage is basically stable, then serial connection. 2. When soldering protection board, thetouch time between soldering iron and protection board should not be too long, within 1. 5s is the best.More information #ad
Brand | Songhe #ad |
Manufacturer | Songhe #ad |
Part Number | Small 65 |
Model | PCB Protection Board |
Warranty | no |
More information #ad
8. Hilitand
#ad
4S 100A 12V LiFePO4 Lithium Battery Protection Board Iron Phosphate LFP w/ Board Charging Controller with Balancing Function 4S 100A 12V
#adHilitand #ad - Wide applications: suit for home DIY work and school science project, wide used in battery protection work. Portable: this battery protection board is very portable2.75*2. 02*039", great for DIY work. Multifunctional: this battery protection board will protect battery pack from overcharging, over-discharging over-current and short circuit, very useful.
More information #ad
For 4 series 12v lifepo4 batteries: used for 4 series 12v lifepo4 batteries, 5P-250mm wires included for your convenient use. Balancing function: this battery protection module has a equilibrium function to keep each cell in balance and can extend the service life of battery.Brand | Hilitand #ad |
Manufacturer | Hilitand #ad |
Height | 0.79 Inches |
Length | 2.76 Inches |
Weight | 0.11 Pounds |
Width | 2.36 Inches |
Part Number | Hilitand5zcbk7v492 |
Model | 5824093521 |
More information #ad
9. Walfront
#ad
12V 100A 4Series BMS Protection Board with Balancing with Overcharge/Overdischarge/Overcurrent/Short Circuit Protection for LiFePO4 Battery Pack
#adWalfront #ad - Balance function: this lifepo4 bms lithium Balance Board is equipped with equilibrium function to keep each cell in balance and good service life. Convenient to operate: this lithium bms is designed for 4 series 12V LiFePO4 batteries, comes with 5P-250mm wire for convenient use.Essential part for circuit board: Protection circuit board is the heart of battery pack, must to have to avoid battery pack from explosion, fire and damage.
More information #ad
Convenient to operate: this lithium bms is designed for 4 series 12V LiFePO4 batteries, comes with 5P-250mm wire for convenient use. Multiple protction functions allows glossy Better Expeience: This Waterproof BMS Multiple protective functions including overcharge protection, overdischarge protection, overcurrent protection and short circuit protection.Brand | Walfront #ad |
Manufacturer | Walfront #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.11 Pounds |
Width | 0 Inches |
Part Number | Walfrontvth9zscx12 |
Model | 4330198367 |
More information #ad
10. QINIZX
#ad
3S 4S 12V 5A Battery Active Equalizer BMS Balancer Lipo Li-ion LFP LiFePO4 Lithium Battery Balance Active Energy Transfer Equalization Module Faster Whole Group Capacitor Balancer PCB
#adQINIZX #ad - It can not fit LTO battery. This can prevent many products from being discarded and wasted. The quiescent current is about 9ma, and the battery capacity is recommended to be used between 30-200AH/Per Balancer. Tips: this balancer board is backward compatible by default.Note: before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Balance current 0-5.
More information #ad
5a, using the original brand new ultra-low internal resistance MOS, reserved for the dormant switch wiring position, Balancer board is connected to the battery to start the balance work, the more balanced the battery current is Small, the dormant power-off mode working current is less than 0.11ma, and the balance voltage accuracy is within 5mv! If it is used for 3S, the last line B4+ is empty. Otherwise, it will short-circuit and burn the board. Working principle: flying capacitor transfer charge transporter, 2oz copper thickness pcb. With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2. 7v, and the standby power consumption is less than 01mA.
Brand | QINIZX #ad |
Manufacturer | QINIZX #ad |
Height | 0.63 Inches |
Length | 2.6 Inches |
Width | 1.8 Inches |
Part Number | JW-CAP-Balancer-4S |
Model | JW-CAP-Balancer-4S |
More information #ad