As an Amazon Associate I earn from qualifying purchases.
Fuhengli #ad - 1. 8'' lcd screen -- outputted voltages shows on the 1. 8'' lcd screen, note: the product screen has a load of scratches All Over It？Because The Screen is Easy to Scratch, if you think it's not beautiful, Easy to Read The 1.
8'' lcd screen was powered by 20-pin / 24-pin connector, We Put a Protective Film on It, You Can Tear It Off by Yourself. Beep alarm -- when your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know.
Note: the voltage of ide / pci-e p6 / sata / eps p8 interface is displayed by the three lights on the left of the power tester. If the light is not on, the three groups of lights + 12V, it indicates that the interface line group is faulty. Aluminum alloy enclosure -- light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance.
TAKHRWOD #ad - 24 pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self. What you get: 3x 24-Pin power supply jumper,. Often used when assembling/testing liquid cooling systems, hard drives, fans, testing lights, BTC Miners or the power supply itself.
COMeap #ad - Connector: 24 pin female ATX plug;. Be available to power up PSU without motherboard;. Compatible with 24 pin and 20 pin ATX power supply;. Run and power up any ATX/EPS power supply;. Be great for bitcoin mining;.
JacobsParts #ad - Checks ground, +5v, +3. 3v, -5v, +12v, and -12V lines. Checks 20/24-pin atx motherboard power, sata hard drive power, mini-molex floppy power, Molex old hard drive power, and 6-pin PCI-e graphics card connectors.
Optimal Shop #ad - 8-in-1 atx power supply tester: support testing 20-pin ide/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector. Buzzer alarm: when your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know.
1. 8" lcd screen: the output voltage is displayed on the 1. 8" lcd screen, which is easy to read 1. 8" lcd screen is powered by the 20-pin/24-pin connector. Note: is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself.
SDTC Tech #ad - 24-pin bridging connector plug can run and start up any ATX/EPS power supply by its self. Often used in assembling/testing PC water cooling systems, BTC Miners, fans, testing lights, hard drives or the power supply itself etc.
Kingwin #ad - Easy to read digital LCD display. 3v / +12v2 / 5vsb / -12v. Made out of aluminum casing. 1v +12v1 / +5v / +3. Accurate voltage indicator +/- 0 Test atx power supply with ease. Robust voltage tester for PC power supply.
HuDieM #ad - What you get: 6 x 24-pin power supply jumper, our worry-free 18-month, and friendly customer service. 24 pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self. Often used when assembling/testing liquid cooling systems, fans, hard drives, testing lights, BTC Miners or the power supply itself.
E-outstanding #ad - The 24-pin bridge plug can operate by itself and start any ATX/EPS power supply. Usually used to assemble/test pc water cooling systems, hard drives or power supplies themselves, test lights, BTC mines, fans, etc.
comidox #ad - Support 20pin, 24pin atx interface / pci-e graphics card 6pin interface / floppy drive interface / 4Pin, 8Pin interface / SATA interface / ATE hard disk interface. The lcd power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal.
It can detect atx, tfx computer power supply, btx, ITX, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply.
3v/+5v/+12v/-12v/sb+5v/pg, external die/sata/p6/p8 is the light displayed, and also measure the output wire P4/P6/P8/SATA/IDE, there is no LCD voltage. It has lcd intuitive and accurate display voltage +/-001v, automatic fault alarm, small and beautiful appearance, complete test interface, and many test functions. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash.
1. Fuhengli
#adComputer PC Power Supply Tester, ATX/ITX/IDE/HDD/SATA/BYI Connectors Power Supply Tester, 1.8'' LCD Screen Aluminum Alloy Enclosure
#ad8'' lcd screen was powered by 20-pin / 24-pin connector, We Put a Protective Film on It, You Can Tear It Off by Yourself. Beep alarm -- when your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know.
More information #ad
If their voltage is normal, + 3. 3, + 5v will be on. 8-in-1 atx power supply tester -- support test 20-pin ide / pci-e 6-pin / eps 8-pin note: can not fit for pci-e 8-pin / 4-pin / 24-pin IDE / Floppy 4-pin / HDD / SATA connectors. Note: the voltage of ide / pci-e p6 / sata / eps p8 interface is displayed by the three lights on the left of the power tester. If the light is not on, the three groups of lights + 12V, it indicates that the interface line group is faulty. Aluminum alloy enclosure -- light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance.
| Brand | Fuhengli #ad |
| Manufacturer | Fuhengli #ad |
| Height | 0.63 Inches |
| Length | 4.9 Inches |
| Weight | 0.19 Pounds |
| Width | 2.6 Inches |
| Part Number | PC - PSU Tester |
| Model | PC - PSU Tester |
More information #ad
2. TAKHRWOD
#ad3pcs 24-Pin ATX Power Supply Jumper Bridge Connector PSU Tester
#adMore information #ad
24 pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use. 24 pin eps / atx power supply jumper bridge tool is compatible with 24/20 pin connector.| Brand | TAKHRWOD #ad |
| Manufacturer | TAKHRWOD #ad |
More information #ad
3. COMeap
#adCOMeap 2-Pack 24 Pin Jumper ATX EPS PSU Power Supply Starter Bridge Tester Connector
#adMore information #ad
| Brand | COMeap #ad |
| Manufacturer | COMeap #ad |
| Weight | 0.04 Pounds |
| Part Number | 4328297878 |
| Model | 8541684662 |
More information #ad
4. JacobsParts
#adATX Power Supply PSU Tester with 20/24 Pin, SATA & Molex HDD Connectors for PC
#adMore information #ad
Easy to use, just plug in connectors and green LEDs illuminate to show which pins are getting power. Power supply will automatically turn on when connected.| Brand | JacobsParts #ad |
| Manufacturer | JacobsParts #ad |
More information #ad
5. Optimal Shop
#adOptimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black
#ad1. 8" lcd screen: the output voltage is displayed on the 1. 8" lcd screen, which is easy to read 1. 8" lcd screen is powered by the 20-pin/24-pin connector. Note: is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself.
More information #ad
Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance. When testing with hdd/floppy disk 4-pin/pci-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage +12V + 3. 3v + 5v.| Brand | Optimal Shop #ad |
| Manufacturer | Optimal Shop #ad |
| Height | 0.8 Inches |
| Length | 8.3 Inches |
| Weight | 0.2 Pounds |
| Width | 3.7 Inches |
| Part Number | Optimal Shop |
| Model | Optimal Shop |
More information #ad
6. SDTC Tech
#adSDTC Tech 24-Pin ATX Power Supply Jumper Bridge Tool PSU Test Starter Without Being Plugged Into The Motherboard
#adMore information #ad
24-pin atx/eps power supply start up jumper Bridge Tool is compatible with 20/24 pin connector. Test starter allows the PSU to be powered on without being plugged into a motherboard. The jumper is using 1007 18AWG cable for reliability in long use.| Brand | SDTC Tech #ad |
| Manufacturer | SDTC Tech #ad |
| Part Number | E-24PIN-ATX-PLUG |
More information #ad
7. Kingwin
#adATX/ITX/IDE/HDD/SATA/BYI KPST-01, Kingwin PC Computer Power Supply Tester, Digital LCD Screen
#adMore information #ad
| Brand | Kingwin #ad |
| Manufacturer | Kingwin #ad |
| Height | 1 Inches |
| Length | 3 Inches |
| Weight | 0.1 Pounds |
| Width | 2 Inches |
| Part Number | KPST-01 |
| Model | KPST-01 |
| Warranty | 1 year |
More information #ad
8. HuDieM
#ad24-Pin ATX PSU Jumper Bridge: HuDieM 24 Pin Power Supply Starter Test Tool Without Being Plugged Into The Motherboard, 6 Packs
#adMore information #ad
24 pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use. 24 pin eps / atx power supply jumper bridge tool is compatible with 24/20 pin connector.| Brand | HuDieM #ad |
| Manufacturer | HuDieM #ad |
| Weight | 0.07 Pounds |
| Part Number | atx 24 pin jumper |
| Model | 24 pin psu jumper |
| Warranty | 18-month |
More information #ad
9. E-outstanding
#adE-outstanding ATX PSU Bridge Tool 2PCS Black 24 Pin ATX EPS PSU Power Supply Jumper Bridge Connector Plug Starter Start Up Switch
#adMore information #ad
Colour: black. Quantity: 2pcs 24-pin ATX PSU bridging tool. The test starter allows to power on the PSU without plugging into the motherboard. Made of high-quality materials, strong, durable and long service life.| Brand | E-outstanding #ad |
| Manufacturer | E-outstanding #ad |
| Part Number | APBTPUS-2 |
More information #ad
10. comidox
#adComidox 1Pcs 20/24 Pin LCD Computer PC Power Supply Tester for ATX BTX ITX TFX SATA with Buzzer Automatic Alarm
#adIt can detect atx, tfx computer power supply, btx, ITX, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply.
More information #ad
Only the 24pin or 20pin will have the LCD voltage. It is the best choice for quickly detecting PC power. The lcd displays various parameters such as output voltage and PG. It can measure the voltage of each group of power supply 3. 3v/+5v/+12v/-12v/sb+5v/pg, external die/sata/p6/p8 is the light displayed, and also measure the output wire P4/P6/P8/SATA/IDE, there is no LCD voltage. It has lcd intuitive and accurate display voltage +/-001v, automatic fault alarm, small and beautiful appearance, complete test interface, and many test functions. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash.
| Brand | comidox #ad |
| Manufacturer | Comidox #ad |
| Part Number | CP218 |
More information #ad
