Top 10 3-Pin Fan Controller – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.



SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard12V 3-Pin, Chassis Fan Hub

LEIHONG #ad - 8 way without speed measurement and pwm function, you can manually adjust the gear position, start the fan at full speed LOW or low speed LOW, or turn off the fan. Built-in double-sided adhesive: this compact HUB easily fits inside your pc case.

Easy installation:it is very easy to setup. It can be used to fix the hub in the chassis. Suit for 12v 3pin fan 8 channels. Using sata interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. Sata cooling fan splitter suit for 12v 3pin fan 8 channels.

Using sATA interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. Connect your rgb items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.
BrandLEIHONG #ad
ManufacturerLEIHONG #ad
Part NumberLH-084

2. Zalman


Zalman Fan Speed Controller FANMATE-2

Zalman #ad - Connector: 3 Pin. Allowable wattage: 6W or Lower. Package: rETAIL. Output voltage: 5v ~ 11V +/- 2%.
BrandZalman #ad
ManufacturerZalman #ad
Height1.02 Inches
Length2.76 Inches
Weight1 Pounds
Width1.02 Inches
Part NumberFANMATE-2

3. Toptekits


LED Sync Cable for MasterFan/MasterLiquid ARGB Series SupportARGB 1-to-5 Splitter, Support 3-pin Addressable RGB, Cooler Master 1-to-5 ARGB Splitter Cable / 5V

Toptekits #ad - 2. Cooler master 1-to-5 argb splitter cable,nOT support 12V RGB, Only support 5V RGB. Note: 1. Certified compatible with Asus Aura, ASRock RGB, MSI RGB. Do not connect an addressable rgbargb/digital rgb +5v fan to a non-addressable rgbstandard +12v motherboard header or RGB controller.

3-pin argb header compatibility, 2ft/60cm Long and flexible material makes it easy for cable routing. Support 3-pin addressable rgb - led sync Cable for MasterFan/MasterLiquid ARGB Series Support. Splitter: - connection type: straight through wiring passive wiring - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male. Keep it effortless and hassle free. With high quality material, keep your build reliable and flawless. Beyond the look, Gigabyte Fusion, Cooler Master provides quality.
BrandToptekits #ad
ManufacturerToptekits #ad
Height4.53 Inches
Length14.57 Inches
Weight0.13 Pounds
Width12.99 Inches
Part NumberMFX-AWHN-1NNN5-R1
Warranty1 Year

4. ZRM&E


ZRM&E PC Fan Speed Controller 8 Way Cooling Fan Hub 3 Gear Speed IDE Molex 1 to 8 Multi Way Splitter 3-Pin Power Socket PCB Adapter

ZRM&E #ad - Type: large 4 pin ide molex 1 to 8 Way Cooling Fan Splitter Hub. Output: 8 way fan interface ports, fits for 12V 3pin / 4pin cooling fan, can be used as speed controller or fan splitter hub. 3 level speed controller: Low Speed, High Speed, and Power OFF. Input: large 4 pin ide power supply interface port, connect to your PC computer. Installation: with thickened 3M glue on the PCB back, you can fix it on your PC case firmly.
BrandZRM&E #ad
Part NumberFANHUB-8WAY

5. Almencla


6 Way 3-Pin 4pin PCI Cooling Fan Speed Controller PC Case Fans Temperature Control, SATA Power Supply

Almencla #ad - Pci bracket available to install fan speed controller. Adjustable knob available to adjust cooling fan revolution speed. Increase speed to reduce computer part temperature when computer parts are busy. Reduce speed to reduce noise & power consumption when computer parts are free. The governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space. The fan can be connected to 6 way 3PIN/4pin interfaces for speed adjustment.
BrandAlmencla #ad
ManufacturerAlmencla #ad
Part Numberce693ca4e94f23f45e87123a98753ff6

6. coolerguys


Manual 12V DC Variable Speed Controller 4 pin Molex to Dual 3 pin Connector

coolerguys #ad - 7 inch tail on 4 pin molex power side. Will fit most standard DC fans with standard 12V 3 Pin connector. 12 inch tail on 3 pin side. Designed to work with dc 12v fans. Click on/off. Moving variable speed control.
Brandcoolerguys #ad
ManufacturerCoolerguys #ad
Part Number840556090236



Chassis Fan Hub CPU Cooling 10 Port 12 V Molex to PWM Connector with 4 Pin 3 Pin Efficient PC-Fan Controller System with Adhesive Tape Dedicated Supply from PSU to Link Multiple Points

BUYMINERS.CA #ad - Cooling when you need it - quiet when you don't. Easy to install - just plug the molex fan controller into the motherboard and connect to the PSU. No frills, all function - strong wire connections and clean sleeving are part of our simple, cost effective design.

The red port on our pwm fan controller allows the operating system to adjust fan speed based on temps. The pwm fan hub then matches the power level for the other ports. The 12v fan controller accurately controls 4-pin fan speed from a single case input. Manages multiple fans - if your motherboard lacks fan interfaces, our pwm fan hub is the neat and tidy way to expand.

If you are unhappy for any reason, contact us for a full refund. Money back guarantee - all of our products are backed by a manufacturer's warranty, and we will go the extra mile to make things right. Take care during installation to avoid bending the pins and capacitor. Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis.
ManufacturerBUYMINERS.CA #ad

8. Semetall


Semetall Chassis Fan Hub CPU Cooling 10 Way 12V PWM Connector 4 Pin 3 Pin Efficient PC Chassis Fan Controller System with Cable,Dedicated Supply from PSU to Link Multiple Points

Semetall #ad - Installion the installation method is very simple. Specification size:75. 6x48. 7 mm/2. 9x1. 9 inches l*w;max current: not exceed 1a for 1 way, 9x black conventional pwm fan interface, not exceed 10a for total 10 ways;package weight:23g;package content: 1 Set1x Red Delicated CPU Fan Interface, 1x 4 Pin IDE Power Interface and 1x PWM Interface for Connecting to CPU FAN Interface On Motherboard.

The high-viscosity double-sided tape is attached to the back of the hub PCB. The 3-pin fan does not have a pwm function, and at the same time, but only when connected to the PWM interface can support speed measurement, so its operating speed cannot be adjusted. Application applicable to 12v, 4-pin pwm fan or 3-pin fan on the motherboard, the purpose is to expand the 4-pin fan 4-pin interface, and to solve the shortcomings of the lack of motherboard fan interface.

Design the red interface is connected to the cpu fan, and the black interface is connected to the PWM fan interface. Be careful not to connect them incorrectly. Note:since the motherboard can only receive one speed signal, the remaining 9 conventional fan interfaces have PWM function, but no speed signal. High function the connected 4-pin fan can be adjusted at the same time, the speed of the fan can be adjusted through temperature control. You can paste it in a flat and suitable position.
BrandSemetall #ad
ManufacturerSemetall #ad
Part NumberDH112257

9. DS leddess


14 Key Remote, SATA Power, DS Mini ARGB RF Controller Kit for Rainbow Fans, 3Pin ADD Header, PC Rainbow led Strip 5V, B Series

DS leddess #ad - Support have 3pin-add-Header Rainbow LED strip or Fans. The leddess mini rainbow lighting Controller Kit Set Up Lighting Inside Your Computer Case. Rf remote controller, control is more free, 215 Dynamic Light Modes and 4 Static Light Colours. Input sata connector, Support All of the PSU models. Support control to ds b series Rainbow fans 3-PIN ARGB Fans.
BrandDS leddess #ad
ManufacturerDS leddess #ad
Part NumberDS035



FBHDZVV Cooling Fans Power Cable 1 to 5 Way PC Case Internal Motherboard Extension Cable Cord Wire for 12V ATX Computer Case CPU Cooling Fans, PWM Fan Hub Splitter 4-Pin/3-Pin pc 5 Way Splitter

FBHDZVV #ad - The 5 way pmw interface is connected to the motherboard cpu fan interface, the first cpu fan dedicated interface, the FAN1/FAN2/FAN3/FAN4 interface is a pwm conventional fan interface.

Compatible with 12v cpu and case fans with 4 pin or 3 pin connector, the extension cable offers greater flexibility between motherboard and CPU cooling fans. Power up to 5 pc fans from a single 4-pin PWM fan header, to solve the lack of pc case fans ports and reduce the load on the motherboard. Easy to install, just insert the PWM chassis fan splitter cable into the motherboard, and then paste the other end to the chassis with double-sided tape. Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean & tidy.
BrandFBHDZVV #ad
ManufacturerFBHDZVV #ad
Part Number176433