Pickling Compound Sparex 2-1/2 lb Bag

#ad
#ad
Krohn PLSPARE2.5 #ad - Non-flammable and non-explosive. 2 for removing surface oxidation, scale and pickling gold, silver and copper based alloys. Pickling compound for flux removal after soldering. Bag. 2-1/2 lb. Sparex is an easy to use, longer lasting, safe replacement for dangerous sulfuric acid in effective cleaning and pickling metals.

Use sparex No.

More information about Krohn PLSPARE2.5 #ad

Copper Tongs, Curved, 8-1/2 Inches

#ad
#ad
Eurotool TONGS1 #ad - By eurotool Ideal for use with pickling solutions. 8-1/2 inches. Rigid and well-made. This curved copper tong is great to use with pickling solutions. Length 8-1/2. Curved jaws. Made of copper. Rigid and well-made.

More information about Eurotool TONGS1 #ad


Similar products



EURO TOOL Handy Flux, 7 Ounce Jar with Brush | SOL-950.01

#ad
#ad
EURO TOOL SOL-950.01 #ad - It is an active fluoride-type flux which is appropriate for all nonferrous metals and begins to melt and dissolve oxides at 600 degrees Fahrenheit 320 degrees Celsius. Rigid and well-made. Handy flux is a very durable and powerful general purpose flux that protects your parts up to 1600 degrees Fahrenheit 870 degrees Celsius.

Curved jaws. Great for soldering and pickling. Paste formula can be cleaned up with hot water. Begins to melt and dissolve oxides at 600 degrees Fahrenheit. Protects parts up to 1600 degrees Fahrenheit. Can be cleaned up with hot water. 8-1/2 inches. Ideal for use with pickling solutions. 7 ounce jar with a brush. Made of copper.

EURO TOOL Handy Flux, 7 Ounce Jar with Brush | SOL-950.01 #ad - 7 oz jar with brush.

More information about EURO TOOL SOL-950.01 #ad


Similar products



Tripod with Mesh Screen and 6-1/2-Inch Legs for Heating and Soldering

#ad
#ad
Eurotool SOL-735.00 #ad - Measurements: Legs are approximately 6 inches long. Curved jaws. Protects parts up to 1600 degrees Fahrenheit. Lightweight 6" x 6" mesh screen is included. 7 ounce jar with a brush. Made of copper. Can also be placed over an alcohol lamp or Bunsen burner to keep a wax pot warm. Primarily used during "sweat" soldering and other heating operations when you need to heat a piece from below.

Ideal for use with pickling solutions. Can also be placed over an alcohol lamp or Bunsen burner to keep a wax pot warm. 8-1/2 inches. Primarily used during "sweat" soldering and other heating operations when you need to heat a piece from below. Rigid and well-made. Can be cleaned up with hot water. Begins to melt and dissolve oxides at 600 degrees Fahrenheit.

Tripod with Mesh Screen and 6-1/2-Inch Legs for Heating and Soldering #ad - Great for soldering and pickling. Quantity: 1 tripod with mesh Screen Please note: Shipping weight with packaging is nearly 2 lbs. Lightweight 6" x 6" mesh screen is included.

More information about Eurotool SOL-735.00 #ad


Similar products



Charcoal Block 5-1/2 X 2-3/4 X 1-1/4 - SOL-480.00

#ad
#ad
Euro Tool SOL-480.00 #ad - Measures 5-1/2" x 2-3/4" x 1-1/4" Ideal for use with pickling solutions. Curved jaws. Great for soldering and pickling. Our premium blocks are wrapped in PVC eliminating the mess often associated with charcoal. Will last 3 to 5 times as long as soft charcoal. Primarily used during "sweat" soldering and other heating operations when you need to heat a piece from below.

The world's best charcoal will last three to five times as long. Wrapped in PVC and individually boxed. 7 ounce jar with a brush. It also has better heat retention, giving the user the desired reflective heat to solder faster and easier with better flow. Made of copper. Can also be placed over an alcohol lamp or Bunsen burner to keep a wax pot warm.

Charcoal Block 5-1/2 X 2-3/4 X 1-1/4 - SOL-480.00 #ad - . 5-1/2 inch by 2-3/4 inch by 1-1/4 inch. Begins to melt and dissolve oxides at 600 degrees Fahrenheit. Can be cleaned up with hot water. Made of charcoal and hardwood. Ideal for jewelry and crafts that require soldering; great for platinum. 8-1/2 inches.

More information about Euro Tool SOL-480.00 #ad


Similar products



uGems Silver Solder Chip Ultra Tiny Precut Pieces 0.5mm X 1mm X .25mm Qty=1500"Easy Density

#ad
#ad
uGems ss114 #ad - This is cadmium and lead free. Chips are 05mm mx 1mm x. 25mm. 5-1/2 inch by 2-3/4 inch by 1-1/4 inch. Lightweight 6" x 6" mesh screen is included. Rigid and well-made. 8-1/2 inches. Protects parts up to 1600 degrees Fahrenheit. Made of copper. Great for soldering and pickling. Curved jaws. Can also be placed over an alcohol lamp or Bunsen burner to keep a wax pot warm.

Usa made and lead-free and cadmium-free; easy-density chips are 05mm mx 1mm x. 25mm; melt 1240 degrees f, flow 1325 degrees; general soldering and repairs, jewelers, craftsmen; beginners should have adequate live instruction; grab a tweezer full of chips and set them down on your charcoal block; no more cutting; the chip sizes are excellent to work with and pretty consistent; one customer suggests you use paste flux for a good join; use a small paint brush dipped in the paste flux to pick up and place the solder pallions; this solder is for general soldering and repairs, teaching, intermediate or final operations for jewelry fabrication, intermediate or final operations.

uGems Silver Solder Chip Ultra Tiny Precut Pieces 0.5mm X 1mm X .25mm Qty=1500"Easy Density #ad - Primarily used during "sweat" soldering and other heating operations when you need to heat a piece from below. These are lots of about 1500 pieces of pre-cut silver solder chips for jewelry fabrication. Ideal for use with pickling solutions. General soldering and repairs, intermediate or final operations; cadmium and lead free.

Easy flow 1325 degrees, general soldering.

More information about uGems ss114 #ad


Similar products



Silver Solder Assortment Easy, Medium & Hard Solder - Jewelry Repair and Craft Soldering Kit

#ad
#ad
JewelrySupply SL999 #ad - Will last 3 to 5 times as long as soft charcoal. Chips are 05mm mx 1mm x. 25mm. Lightweight 6" x 6" mesh screen is included. Ideal for jewelry and crafts that require soldering; great for platinum. Our solder is perfect for Sterling Silver Jewelry making and repairs. Easy: melting point: 1, 275°f 691°c - flow point: 1, 360°f 738°c hard: melting point: 1, 240°f 671°c - flow point: 1, 365°f 741°c - flow Point: 1, 325°f 718°c medium: melting point: 1, 450°F 788°C.

Wire thickness: 20 Gauge. Curved jaws. Wrapped in PVC and individually boxed. General soldering and repairs, intermediate or final operations; cadmium and lead free. Can be cleaned up with hot water. Easy: melting point: 1240* - flow point: 1325* medium: melting point: 1275* - flow point: 1360* Hard: Melting Point: 1365* - Flow Point: 1450* Ideal for use with pickling solutions.

Silver Solder Assortment Easy, Medium & Hard Solder - Jewelry Repair and Craft Soldering Kit #ad - Each type of solder is 1 Foot Long and Cadmium-free. Protects parts up to 1600 degrees Fahrenheit. Made of copper. Beginners should have adequate live instruction. Easy flow 1325 degrees, general soldering.

More information about JewelrySupply SL999 #ad


Similar products



Deluxe Titanium Soldering Pick Set, Set Of 3, 6-1/2 Inches | SPK-930.99

#ad
#ad
EURO TOOL #ad - General soldering and repairs, intermediate or final operations; cadmium and lead free. With a non-roll handle it features a titanium shaft, which is the absolute best for all non-ferrous metal except platinum. Silver precut tiny solder "easy" density. Begins to melt and dissolve oxides at 600 degrees Fahrenheit.

7 ounce jar with a brush. Each type of solder is 1 Foot Long and Cadmium-free. Easy flow 1325 degrees, general soldering. Rigid and well-made. Primarily used during "sweat" soldering and other heating operations when you need to heat a piece from below. 3 picks, blue, gold and red handles. Will last 3 to 5 times as long as soft charcoal.

Deluxe Titanium Soldering Pick Set, Set Of 3, 6-1/2 Inches | SPK-930.99 #ad - Get 3 types of 1 foot long silver Solder in this assortment Easy Flow, Medium Flow & Hard Flow. Has a titanium shaft. Ideal for jewelry and crafts that require soldering; great for platinum. Wrapped in PVC and individually boxed. 8-1/2 inches. Made of charcoal and hardwood. 6-1/2" in length.

More information about EURO TOOL #ad


Similar products



Deluxe Titanium Soldering Pick Blue - SPK-930.00

#ad
#ad
Euro Tool #ad - 5-1/2 inch by 2-3/4 inch by 1-1/4 inch. General soldering and repairs, intermediate or final operations; cadmium and lead free. 3 picks, blue, gold and red handles. Silver precut tiny solder "easy" density. Great for soldering work with non-ferrous metal except platinum. 7 ounce jar with a brush. Beginners should have adequate live instruction.

Chips are 05mm mx 1mm x. 25mm. Titanium tip picks are the absolute best for all non-ferrous metal except platinum. 8-1/2 inches. Will last 3 to 5 times as long as soft charcoal. Blue titanium soldering pick for soldering jewelry & metal repairs this is a new titanium soldering pick Has a fine titanium machined tip that collects the exact amount of solder for precise application Titanium tip picks are the absolute best for all non-ferrous metal except platinum It has a handle that is designed to quickly transfer heat away from the operator It measures approximately 6 1/2" 165 mm long Ideal for use with pickling solutions.

Deluxe Titanium Soldering Pick Blue - SPK-930.00 #ad - Each type of solder is 1 Foot Long and Cadmium-free. It has a handle that is designed to quickly transfer heat away from the operator. Great for soldering and pickling. Wrapped in PVC and individually boxed.

More information about Euro Tool #ad


Similar products



EURO TOOL Single Third Hand with Tweezer | HOL-165.00

#ad
#ad
EURO TOOL TLTW3HAND #ad - It has a handle that is designed to quickly transfer heat away from the operator. 5-1/2 inch by 2-3/4 inch by 1-1/4 inch. Single third hand features 6-1/2" pointed tweezers mounted on a weighted base to hold items stable and secure in any position while soldering. Made of charcoal and hardwood. Lightweight 6" x 6" mesh screen is included.

Can also be placed over an alcohol lamp or Bunsen burner to keep a wax pot warm. Begins to melt and dissolve oxides at 600 degrees Fahrenheit. Protects parts up to 1600 degrees Fahrenheit. Get 3 types of 1 foot long silver Solder in this assortment Easy Flow, Medium Flow & Hard Flow. Rigid and well-made. Has a non-roll handle.

EURO TOOL Single Third Hand with Tweezer | HOL-165.00 #ad - Has a titanium shaft. Beginners should have adequate live instruction. Primarily used during "sweat" soldering and other heating operations when you need to heat a piece from below. This item enables you to have both hands free while working on a multitude of projects. Curved jaws. 8-1/2 inches. Enables you to have your hands free while working.

More information about EURO TOOL TLTW3HAND #ad


Similar products



Copper Tongs, Curved, 8-1/2 Inches

#ad
#ad
RJS #ad - Tweezers are 6-1/2 inches long. This curved copper tong is excellent to use with pickling solutions. Wrapped in PVC and individually boxed. Begins to melt and dissolve oxides at 600 degrees Fahrenheit. Our solder is perfect for Sterling Silver Jewelry making and repairs. Easy: melting point: 1, 360°f 738°c hard: melting point: 1, 275°f 691°c - flow point: 1, 325°f 718°c medium: melting point: 1, 365°f 741°c - flow Point: 1, 240°f 671°c - flow point: 1, 450°F 788°C.

Wire thickness: 20 Gauge. Great for soldering work with non-ferrous metal except platinum. Curved jaws. 8-1/2 inches. Ideal for use with pickling solutions. Length 8-1/2. Rigid and well-made. Lightweight 6" x 6" mesh screen is included. 5-1/2 inch by 2-3/4 inch by 1-1/4 inch. 6-1/2 inches long. Made of copper. Each type of solder is 1 Foot Long and Cadmium-free.

More information about RJS #ad


Similar products